If you need this information and have access to a calculator with trig
functions, you can use the arc tangent to get this angle. This varies
according to the calculator, but you enter the number, then press the
1/X function key, then (usually) you press the INV key followed by the
TAN key.
So, on my calculator, the ratio of 1:9 gives me
6.3401917459099093959941376648275 degrees. Not that the fraction
matters.
YMMV. Void where prohibited by natural law or the imprecision inherent
in a pencil line.
Gary Katsanis
Albion New York, USA
with thanks to Chuck Taylor for suggesting this eminently practical
approach
-----------------------------------------From: "Darrell"
To: "Chuck Taylor"
Cc: "oldtools@g..."
Sent: Sunday November 27 2022 5:56:15PM
Subject: Re: [oldtools] knockdown shelf project continues to entertain
me
On Sat., Nov. 26, 2022, 8:36 p.m. Chuck Taylor, wrote:
> Darrell asks about wedge angles:
>
>
> Here are some ratios that cover a reasonable range for wedges and
their
> equivalents in degrees:
>
> 1:4 is about 14 degrees
> 1:5 is about 11.3 degrees
> 1:6 is about 9.5 degrees
> 1.7 is about 8.1 degrees
> 1:8 is about 7.1 degrees
> 1:9 is about 6.3 degrees
> 1:10 is about 5.7 degrees
> 1:11 is about 5.2 degrees
> 1:12 is about 4.4 degrees
>
> I find that ratios are easier to mark out and reproduce
consistently. YMMV.
>
> Cheers,
> Chuck Taylor
> north of Seattle USA
>
Thanks Chuck
I'm going to print this out and stick it on the shop wall
-- wood hoarder, blade sharpener, and occasional tool user
>
Links:
------
[1] https://groups.io/g/oldtools/unsub
|