OldTools Archive

Recent Bios FAQ

158501 "Derek Cohen" <derekcohen@i...> 2006‑03‑22 Update on bio
Esteemed Galoots-of-the-Porch

It is a few years since I offered an all too brief bio, and this has served
to obfuscate any attempt at penetrating my true identity. I have been
meaning to provide an update for some time, but both time and a healthy dose
of procrastination have been my enermies. 

A short while ago, Sawmill Creek did the Unwise and published an interview.
Because I really cannot go through this more than once, I have copied it
here for your edification ... or amusement. At least there are a few
pictures to keep you from nodding off. 

There are a few others who also frequent Sawmill Creek and will no doubt
shortly be receiving the same treatment -  Mike Wenzloff, Alan duBoff and
Alf, just to name three. 

Kind regards from Perth

Derek

1. Name (and nick names)

 

Derek Cohen

2. Age/DOB

 

I am 56, date of birth 11th January 1950

3. Location (present and previous)

 

I was born in Cape Town, South Africa in the shadow of Table Mountain.
Growing up amidst the political conflict and social inequality were
foundation experiences that have clearly influenced my outlook on life. In
the very early 80s, when political change was looking like it was not going
to happen (and, indeed, it was moving in the opposite-to-desired direction,
with increasing conservatism and racism), my wife and I migrated to
Australia to offer our children a normal life. We lived in Sydney for a few
years before moving west across the country to Perth for the laid-back
lifestyle, sun and surf. We have been in Perth 18 years now and live in a
small, leafy suburb alongside the Swan River.

4. Tell us about your family.

 

There is Lynndy, the LOML, who is the most warm and nurturing person I know,
a kindergarten teacher all her adult years, until 12 months ago when she
resigned and started a business with her best friend. And Jamie, our 13 year
old son, would-be pro tennis player and would-be rock guitarist, who has
just begun high school and discovered the angst of teenagerhood. Oh, I
should not leave out Rufus, the two-year old golden retriever whose hobby is
re-arranging the back garden. Thanks to him I have now taken up landscaping!

 

Our parents continue to live in Cape Town. We have brothers and sisters
scattered around the world. My dad is turning 92 in June and still climbs up
on the roof to clean the gutters! He was an award-winning architect and I
blame him for my love of wood and an interest in design. As I write this I
look across the living room to a pair of modern-looking bentwood armchairs.
They were subsequently built in Czechoslovakia in 1939, and the last exports
from that country before Hitler invaded. My mother was a journalist and, in
later years, ran a business selling collectables as well as an art gallery.
She continues to work in a consultancy role. There are some serious writers
on her side of the family and I guess I had little choice but to develop an
interest in writing as well! As you all have gathered about my style by now,
why use one word when a dozen will do?

 

http://i13.photobucket.com/albums/a262/Derek50/Furniture/Dadschairs.jpg

 

5. How do you earn a living, woodworking or other, any interesting previous
occupations.

 

After completing high school I attended university (college) to train as a
quantity surveyor (which is the accounting end of the building industry).
The positive was that I did get to work on building sites and study
construction, but otherwise found this so boring, that I dropped out after a
couple of years. I returned to university to study journalism, then switched
to a major in psychology, taking this through several degrees to qualify as
a clinical psychologist. I have specialized in child psychology since 1983,
working in hospitals, clinics, and private practice over the years. I am
currently in full time private practice. 

 

I came to woodworking like many hobbyists % as a result of home repairs.
Well, it was probably a bit more than that. I have always been Mister Fix-it
 a role I had in my childhood where I was forever repairing all-and-sundry
(or, as Lynndy is fond of saying, being a compulsive modifier). I guess I
have always tinkered. Over the past few decades I renovated houses we bought
 usually doing most of the work myself. Our current home began as a
brick-and-tile shell, and I have completed built-in cabinets, doors, trim,
and quite a bit of the furniture, such as beds, wardrobes, and sideboards.
As my constructions became more sophisticated, so I turned increasing away
from the Normite approach to the Neander. 

 

http://i13.photobucket.com/albums/a262/Derek50/Furniture/bed.jpg

 

http://i13.photobucket
com/albums/a262/Derek50/Furniture/WardrobeinHoopPineandJarrah2.jpg

 

http://i13.photobucket
com/albums/a262/Derek50/Furniture/SideboardinKarriandPly2.jpg

 

My interest in woodworking centers around building furniture and tools, it
has also developed into an interest about its historical and social
influences. I am now enjoying woodworking increasingly as an artistic outlet
 not just as a way of just unwinding from work. I see that this is due to my
emphasis on handtools. 

 

In the past few years my teacher-scientist-historian side has had an outlet
in researching and writing reviews on handtools, as well as running
workshops on techniques in using hand-planes or sharpening. Of course I
continue to be as much of a compulsive tinkerer as ever, and have designed
and built many jigs and tools over the years. 

6. Equipment overview (hand tools and other)

 

I have both power and handtools. The power side is not as extensive as many,
as I do not own the thicknesser/planer/jointer dimensioning machines. I do
have a large 12" tablesaw with sliding table and in-built router table, a
14" bandsaw (with 6" riser), a floor standing drill press, a large belt
sander (used to grind blades) and a lathe. There are the usual Normite range
of circular saws, jigsaws, biscuit joiner, powered and battery drills,
routers, and so on one would expect from a home renovator. Most of these
languish in cabinets or gather dust now as my interest in developing my
handskills has grown over the past 7 or 8 years especially. 

 

Woodworking is now synonymous with handtooling, and I have an array of both
old and new handtools, some collectable(-ish) and some I have built myself.
Working wood in Australia places added demands on the tools and steel used.
We have seriously hard and gnarly wood here. It commands much respect, but
it certainly returns the favour in its beauty. The wooden handplanes by HNT
Gordon are just wonderful, offering both form and function. I have been
fortunate to review and obtain many of the Veritas handplanes, especially
the bevel-up ones, and these have a superior ability to tame the rebellious
nature of Aussie timber. I do own several block-, edge and side rabbet
planes by LN as well. When there is an opportunity to work softwoods, or
easier hardwoods, I often reach for the Stanley planes (in the main these
are USA-made versions). 

 

It is difficult to convey the breadth of the handtools I have without making
it sound like a gloat list, so I will suffice to say that there are Stanley
combination planes, various block planes, a half set of York pitch H&Rs, and
a budding collecting of molding planes. I have this huge curiosity about
handtools and I want to try them all out. 

 

I have far too many chisels for one lifetime!  I do so love using chisels %
the sense of connectedness to wood is only rivaled by spokeshaves and block
planes. Bergs for paring, Witherbys for general work, Nooitgedacht for rough
work, Iyoroi butt chisels and Matsumura dovetail chisels, vintage UK firmer
and oval bolstered mortice chisels (such as Sorby and Ward).

 

I am increasingly taken with handsaws as my confidence grows. Several
Disston and Spear & Jackson rip and crosscut saws, vintage 12" Disston and
14" Nurse tenon saws, and 4 or 5 dovetail saws. I recently built a stairsaw
for dados and sliding dovetails, and at the end of last year I actually won
a medal at a woodworking show for a bowsaw.

 

http://i13.photobucket.com/albums/a262/Derek50/Tools that I have
made/StairsawcomboWC.jpg

 

http://i13.photobucket.com/albums/a262/Derek50/Tools that I have
made/1Bowsaw.jpg

 

Both Mike and Leif have been a huge inspiration for me, and now I am
determined to make a few dovetail and tenon saws of my own. Thanks guys!

7. Describe your shop

 

The shop consists of most of a double garage, and the tool cabinets take up
1 ½ walls. Still, it is space shared with the family and there is one wall
of windsurfing gear.  The open rafters serve as storage for lumber. The shop
doubles for metalwork as well. It is also home to a vintage Porsche 356
(1957 "A" Coupe) that I have been restoring for about 8 years. I have done
all the panel work myself, and had help with the mechanics and electrics. It
is now at the point where I can drive it to work some days. 

 

http://i13.photobucket.com/albums/a262/Derek50/Workbench and
Workshop/Workshoptools2.jpg

 

The "real" workshop looks like this!

http://i13.photobucket
com/albums/a262/Derek50/Workbench%20and%20Workshop/Realworkshop.jpg

 

8. Tell us about the handplanes you own, and your favorites one(s) to use

 

Two stand out. One is a Stanley #62 (low angle jack) that I restored. The
other is a Stanley #65 Knucklejoint block plane. Both have a light, almost
delicate balance that aids the illusion that they are an extension of one's
hand. 

 

I have built a few planes % an infill smoother, a chamfer plane, and a
dovetail plane. I am in the early stages of a Stanley #51 copy (with low
angle modifications). I like the idea of building more planes in the future.

9. Your favorite chisels.

 

I have a set of dovetail chisels I made from unhandled Berg orphans. I
ground the sides and turned the handles to suit my grip. They are for
pushing only and have an incredible delicate feel. At the other end of the
spectum I have discovered oval bolstered mortice chisels. I have had fun
making up a set and building handles from different hardwoods. These provide
tremendous control and slice into wood like nothing else.

 

http://i13.photobucket.com/albums/a262/Derek50/image002.jpg

 

http://i13.photobucket
com/albums/a262/Derek50/Chisels/OvalBolsteadMorticeChiselsWC.jpg

10. Your favorite handsaw(s).

 

My LN Independence dovetail is moving up the list. It is a beautifully made
and balanced saw, but it has been more difficult to get to work comfortably.
It is becoming the saw I hear so many rave about. I have an old, much
pre-loved (not-as-pretty!) John Cotterill dovetail saw that I renovated and
sharpened. It has a similar feel, is just as accurate but cuts less
aggressively and with less effort. 

 

11. Do you use western tools or Japanese, why do you prefer the ones you use

 

I have a number of Japanese chisels and saws. The chisels are often the ones
I turn to first if I plan to chop into hardwood. With their short, hooped
handles, I find them less comfortable for paring. The saws are simply the
easiest and cleanest to use of all types. However they are better suited for
soft woods, for which they are reserved, since our Aussie hardwoods sound
the death knell for their teeth.

12. Do you have a woodworking home page.

 

At this time I am scattered over the internet. You can find some of my
reviews at 

http://www.wkfinetools.com/contrib/dCohen/index.asp 

and articles at 

http://www.woodcentral.com/cgi-bin/articles.pl

 

I am in the process of putting together a website at wkfinetools.com. This
will then bring together much of the above and much more. 

 

13. Do you have any influences in your work. Certain styles or designers you
follow/prefer.

 

My taste in furniture is for simple lines with good proportions and subtle
curves (my designs are increasingly including curves, such as this recent
Jarrah and Blackbutt sofa table). And the use of interesting grains to set
these off. Shaker and Japanese designs, the work of Maloof, Krenov, and
Nakashima.

 

http://i13.photobucket.com/albums/a262/Derek50/Furniture/Sofatable.jpg

 

14. Do you have any ancestors who were woodworkers that served as
inspiration.

 

I am filled with a mix of envy and wonder for those who own tools handed
down through the generations. I suspect that I am the first woodworker in my
family. My father was a boy scout and taught me to use an axe, tie a knot,
and start a fire. This has not been terribly helpful when building fine
furniture! On the other hand, my childhood included camping out among the
forests, and dad was ahead of his time in building our home with woods from
around the world. 

15. What is your favorite neander project, or part of a project, you have
ever done and why.

 

Two stand out. The first was a Shaker chest of drawers I built for my son a
few years ago. I intended that he keep it when he one day moves away, so
have left a couple of messages secreted in the construction. 

 

http://i13.photobucket
com/albums/a262/Derek50/Furniture/ChestofdrawersforJamie.jpg

 

The second piece is just a simple box that I made for my mother.  It was her
80th birthday and the box was used to transport her perfume present.
Needless to say, she preferred the box to the perfume (isn't that what mums
do?).

 

http://www.woodworkforums.ubeaut.com.au/attachment.php?attachmentid=5427

http://www.woodworkforums.ubeaut.com.au/attachment.php?attachmentid=5440

16. Do you believe there is any spiritual dimension to woodworking with
handtools.

 

I think "spiritual" may be going a bit too far. Perhaps "intimate" would be
more appropriate, as in the artist with a brush and palette. Handtools allow
for a delicacy of movement, the opportunity to add subtleties that power
tools cannot approach. I find no pleasure in, for example, donning earmuffs,
mask and safety glasses to use a router table. The neander workshop is a
quiet and relaxing refuge from the stresses of deadlines and the intense
exchanges at work. My best time is a quiet Sunday morning, with the stereo
playing 60s and 70s jazz % the piano of Bill Evans, a selection of handtools
 and a drawer to dovetail… 

17. How much of your work is done by handtools. Do you use whatever is best
for the job or do you use handtools even when they are less efficient.

 

Most of my wood comes from salvage yards. Old Jarrah, Blackbutt and Bluegum
floorboards and roof beams dominate. These are seriously hard woods, and
there is no way I am going to try to rip them to rough size with a handsaw!
For this I will use a tablesaw or bandsaw. Crosscuts are another matter, and
I will use a carcass saw or a mitrebox. I may also use the bandsaw to resaw
and to shape curves. As I mentioned earlier, I do not own a
planer/thicknesser/jointer, so all further work is completed with handplanes
% a variety of scrub planes, jack planes, try planes, and jointer planes. I
use a shooting board, refine curves with spokeshaves and finish the surface
with one of many smoothers. I rarely have to use sandpaper (I would if I
needed to) and generally find card scrapers are sufficient backup if the
smoothers are not enough.

18. What is your single most favourite tool, and why.

 

A sharp paring chisel

 

 

Derek Cohen

March 2006   
------------------------------------------------------------------------


Recent Bios FAQ