wed, 25-may-2011, 06:53
Standing desk

My standing desk, in use

These plans are for a two-level platform that sits on top of an existing desk to bring the height of the main surface to a comfortable standing height. My original desk is 28½” high, and the first platform raises this up 14¼” so the primary surface becomes 42¾” from the ground. This results in my forearms (I’m 6’ 3" tall) resting parallel to the ground when I’m typing at a keyboard. The second platform holds one or more LCD monitors at eye level and sits on top of the first.

The primary surface is ¾” birch plywood, wrapped with a thin strip of wood. This is supported by a frame of 1 x 4” rails and 1½” tapered legs. The rails and legs can be joined with mortise and tenon joints, dowels or pocket screws (I used 5/16” dowel pins, two in each side of the rails). The monitor stand is similar, but with 1 x 2” rails.

My standing desk is finished with several coats of amber and superblonde shellac, then waxed with a good paste wax.

The following is an SVG diagram showing the plans. If you’re having trouble viewing it in your browser (Internet Explorer and older browsers haven’t implemented the SVG standard), this entire post is available as a PDF file (919Kb).

Plans

Tools

I used a circular saw with a plywood cutting blade to cut the plywood tops and to rip the trim I used to wrap the edges of the plywood. The legs and rails were cut to length using a Millers Falls Langdon miter box, and I used a Henry Peace rip saw to taper the legs. The tapers were cleaned up with a Stanley #6 corregated sole hand plane. Dowels were located with a self-centering dowel jig and drilled with a power drill. I used Titebond III to glue the legs to the rails, and fastened the tops to the rails using small corner brackets.

Cut List

Count Dimensions Notes
1 ¾” x 30” x 60” birch plywood Main platform top
1 ¾” x 12” x 36” birch plywood Monitor platform top
4 1½” x 13½” hemlock, tapered Main legs
2 ¾” x 3½” x 49” hemlock Front and back rails
2 ¾” x 3½” x 21” hemlocks Side rails
4 1½” x 10” hemlock, tapered Second platform legs
2 ¾” x 2” x 27” hemlock Front and back rails
2 ¾” x 2” x 5” hemlock Side rails
Meta Photolog Archives